The HDfury1 was RGBHV output only with a DVI-D input. The HDfury2 introduced component (Y/Pb/Pr) output support with HDMI® 1.1/1.2 input; color depth upscaling to render 16-235 as 0-255; stereo sound output in both optical and analog; and supported third party accessories support on its output. The HDfury2 had an RGB output similar to the HDfury1 but with extended color depth range for better colours. For the HDfury3; the component features from HDfury2 were kept while the RGB and audio output were completely reworked and improved. We are now extremely proud to announce that the LEFT SHIFT issue in RGB mode is NO MORE! The HDfury3 allows users to shift the picture LEFT/RIGHT at will through push buttons. The color depth upscaling feature is now also user selectable (ON/OFF via DIP switch). The HDfury3 also features 4 customizable EDID banks; two of which may be used to limit the output resolution to 1080i out of the box (again via DIP switches). A very useful feature for anyone with a display that supports 1080i but not 1080p and has sources that do not offer manual setting of the output resolution. Also included are two HDMI 1.3 inputs with Deep Color support and MANUAL or AUTO switching. Owners of fussy RGB displays will also be happy to learn that the H/V syncs may also now be force to either positive or negative via DIP switch. The RGB pixelclock bandwidth is greatly improved with 225Mhz support (1080p/72 is now perfectly resolved)! For information on how to set these options see our HDFury3 User Manual. Main Features: 2x HDMI® 1.3 input with Deep Color support (Manual or Auto switch mode available; user selectable) Component (YPbPr/YCbCr) and VGA (RGBHV) video output Sound output in both Analog and Digital Optical (S/PDIF 5.1 Dolby/DTS) through an innovative 3.5mm combo jack 4x EDID® banks (2 per channel) Built-in user selectable output resolution limit settings Customization settings available through DIP SWITCH Perfectly and automatically center image in all standard NTSC/PAL component modes Manually adjust horizontal screen position in all NTSC/PAL RGBHV modes Performs Colour Depth Upscaling in all modes (ON/OFF user selectable) Sync Polarity Inverter included Automatic SD/HD color-space selection Accept third party accessories on its output Improved output cable driver for driving long cable runs (40-50') Software upgradeable Technical Specs: Input: 2 x HDMI® v1.3 (DVI™ 1.0 compatible) Switch: Auto / PortA / PortB 10-bit deep color HDMI native support Output: VGA FEMALE output connector; 10 bit analog resolution. HDCP supported (Integrated HDCP decipher engine; Preprogrammed HDCP key) Horizontal shift capability for RGB output mode Enabled with a dip-switch; applied with push-buttons Output sync polarity selector for RGB modes (dip switch) Output format: Either RGB or YPbPr; dip-switch selectable YPbPr requires VGA->3RCA breakout cable All HD/SDTV formats from 1080p down to 480i; NTSC and PAL Including 1080p @ 72Hz PAL and NTSC (for RGB output only) Including 1080p @ 24Hz PAL and NTSC 11-bit 225MHz DAC processing (for true 10-bit analog output) Two separate Internal EDID EEPROM with complete CEA861 extension block Dip-switch selectable One EDID supports all formats The other EDID® is up to 1080i; and no 24Hz support (by default; reprogrammable) Automatic Input Format Detection: Digital YCbCr and RGB Full BTB and WTW support in YPbPr output Automatically switches color-spaces for both HDTV and SDTV Precise black levels – no black crush in any standard mode Dual purpose audio output connector S/PDIF digital output for 5.1 Dolby/DTS Analog L/R 2-channel stereo Industry-Standard Compliance HDMI 1.3 EIA/CEA-861D DVI™ 1.0 HDCP™ 1.1 Digital Video Input / Output Dual integrated HDMI 1.3 cores Supports DTV resolutions up to 1080p @ 72Hz or 720p/1080i @ 120Hz with 36-bit color depth. Flexible digital video interface:- 24/30/36-bit RGB/YCbCr 4:4:4- 16/20/24-bit YCbCr 4:2:2- 8/10/12-bit YCbCr 4:2:2 (ITU-R BT.656) Integrated RGB Color Space Converter for both RGB-to-YCbCr and YCbCr-to-RGB (both 601 and 709) with true 12-bit accurate data using 14-bit processing 4:2:2 <> 4:4:4 converter with 12-bit accurate data using 14-bit processing Digital Audio Output Industry-standard S/PDIF output Supports 2-channel 32-192kHz stereo audio Supports IEC60958 2-channel PCM Capable of passing IEC61937 compressed audio (5.1 Dolby Digital™; DTS®; etc.) Support Files: User's Manual (Nov 29; 2010) DVI™ is a trademark of the Digital Display Working Group. HDMI®; the HDMI Logo; and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. EDID® is a registered trademark of the Video Electronics Standards Association. HDCP™ is a trademark of Digital Content Protection LLC. Dolby® and the double-D symbol are registered trademarks of Dolby Laboratories. Dolby Digital™ is a trademark of Dolby Laboratories. DTS® is a registered trademark and the DTS logos and Symbol and are trademarks of DTS; Inc. Updated May 8; 2019
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.